The CBM2903 is the dual comparator version, and the outputs can be connected to other open-collector outputs to achieve wired-AND relationships. It can operate from 2V to 30V, and have low power consuming 0.7µA (MAX) per channel.
The CBM2903 consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Quiescent current is independent of the supply voltage. The device is the most cost-effective solutions for applications where low offset voltage, high supply voltage capability,low supply current, and space saving are the primary specifications in circuit design for portable consumer products.
The CBM2903 is available in Green SOP-8, TSSOP-8 packages. It operates over an ambient temperature range of -40°C to +85°C.
CBM2903 Application
CBM2903 is usually used to compare a single signal with a reference signal or two signals. Many users use the open drain output to drive the comparison logic output to the logic voltage level, so as to send it to MCU or logic equipment. The wide power range and high voltage capability make the chip suitable for translating electricity to a higher or lower voltage to realize level conversion. The following is a typical application diagram of CBM2903:
CBM2903 Typical characteristics
lSupply Range:+2V to +30V
lOffset Voltage:±1mV(TYP)
lLow Supply Current:0.7μA (MAX) per channel at VS = 30V
lCommon-Mode Input Voltage Range Includes Ground
lLow Output Saturation Voltage
lResponse Time:1.3μs
lOpen-Drain Output for Maximum Flexibility
lOutput compatible with TTL, MOS, and CMOS
lOperating Temperature Range:-40℃~+85℃
lMicro SIZE PACKAGES:SOIC-8(SOP8),TSSOP8
CBM2903 Main features
lWide power supply voltage range: Suitable for most high-voltage product applications, and there is no need to change the peripheral power supply
lLow static current: Greatly reduce the static power consumption of the product and save energy
lLow input offset voltage: Ensure better stability and accuracy of the product
l Micro packaging: Save space for product PCB design
CBM2903 Typical electrical characteristic diagram
The characteristic diagrams of several main parameters of cbm2903 are as follows: